Mercedes-Benz S-Class 2011, Operator'S Manual

Page: 153 / 524

X
Select the route option(s) and press
W
to
confirm.
The route options are switched on
O
or off
ª
, depending on the previous status.
i If you change the route type and/or the
route options while route guidance is active
(the route has been calculated), COMAND
will calculate a new route.
If you change the route type and/or the
route options while route guidance is
inactive (no destination has been entered
yet), COMAND uses the new setting for the
next route guidance.
i
The route calculated may, for example,
include ferry connections, even if the
Minimize Ferries
route option is
switched on.
In some cases, e.g. when calculating
particularly long routes, COMAND may not
be able to take all the selected route
options into account.
X
To exit the menu: slide
XVY
the COMAND
controller.
Entering destinations
Introduction to destination input
G
Warning!
For safety reasons, only enter a new
destination when the vehicle is stationary.
You could otherwise be distracted from the
traffic conditions, cause an accident and
injure yourself and others.
The following destination input options are
available:
R
entering a destination by address
R
entering a destination from the destination
memory
R
entering a destination from the list of last
destinations
R
entering a destination using the map
R
entering an intermediate stop
R
entering a point of interest
Entering a destination by address
Introduction
When entering an address as the destination,
you have the following options:
R
entering the state/province, city/ZIP code
and street
R
entering the state/province, town/ZIP
code and center
R
entering the state/province, town/ZIP
code, street and house number
R
entering the state/province, town/ZIP
code, street and intersection
R
entering the state/province, street, city
and house number
R
entering the state/province, street and
house number
R
entering the state/province, street and
intersection
i You can only enter those cities, streets,
ZIP codes etc. that are stored in the digital
map. This means that for some countries
you cannot enter ZIP codes, for example.
Example: entering an address
The following is a step-by-step example of
how to enter an address. The destination
address is as follows:
New York (state)
New York (city)
40 Broadway
You can of course enter any country, city,
street and house number desired and enter,
for example, your home address (My
address).
Calling up the address entry menu
X
To switch on navigation mode: press the
S
function button once or twice.
X
To show the menu: press the
W
COMAND
controller.
Navigation
151
COMAND
Z