Mercedes-Benz S-Class 2011, Operator'S Manual

Page: 160 / 524

:
Current vehicle position
;
Crosshair
=
Details of the crosshair position
?
Map scale selected
Display
=
depends on the settings selected
in "Map information in the display"
(
Y
page 182). The current street name can
be shown, provided the digital map contains
the necessary data, or the coordinates of the
crosshair if the geo-coordinate display is
switched on and the GPS signal is strong
enough.
Moving the map and selecting the
destination
X
To scroll the map: slide the COMAND
controller
XVY
,
ZV Æ
or
aVb
.
X
To set the map scale: as soon as you turn
cVd
the COMAND controller, the scale bar
appears.
X
Turn
cVd
until the desired scale is set.
Turning clockwise zooms out from the map,
turning counter-clockwise zooms in.
X
To select a destination: press
W
the
COMAND controller once or several times.
You will see either the address entry menu
with the destination address or, if COMAND
is unable to assign a unique address, a
selection list.
X
Select a destination by turning
cVd
the
COMAND controller and press
W
to
confirm.
If the destination is within the limits of the
digital map, COMAND attempts to assign
the destination to the map.
If the destination can be assigned, you will
see the address entry menu with the
address of the destination. If not, you will
see the
Destination from Map
entry.
X
To start route calculation: select
Start
and press
W
to confirm.
Entering an intermediate stop
Introduction
When route guidance is active, you can enter
an intermediate stop. Intermediate stops can
be predefined destinations from the following
categories that COMAND offers for selection:
R
Mercedes-Benz Service Center
R
Hospital
R
Gas Station
R
Parking Lot
R
Restaurant
However, you can also enter destinations
other than the predefined ones. To do this,
select the menu item
Other
.
You can use the intermediate stop function to
influence route guidance to the main
destination. When you have reached your
intermediate stop, COMAND automatically
recalculates the route to the main
destination.
158
Navigation
COMAND