Mercedes-Benz S-Class 2011, Operator'S Manual

Page: 97 / 524

X
Make sure that the sliding sunroof can be
opened or closed fully again when operated
automatically (
Y
page 94).
X
If the sliding sunroof can be raised fully at
the rear, it has been reset correctly. If this
is not the case, repeat the steps above
again.
Operating the panorama sliding
sunroof
Opening and closing
Overhead control panel
:
To raise
;
To open
=
To close
The panorama roof with power tilt/sliding
panel can only be moved when the roller
sunblinds are open.
i
When raising the panorama roof with
power tilt/sliding panel, the front roller
sunblind opens first if it was closed.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Push or pull the
3
switch in the
corresponding direction.
i
If you press the
3
switch beyond the
point of resistance, an automatic opening/
closing process is started in the
corresponding direction. You can stop
automatic operation by pressing again.
Operating the roller sunblinds of the
panorama sliding sunroof
General notes
The roller sunblinds provide protection from
the sun. The front roller sunblind can only be
opened and closed when the panorama roof
with power tilt/sliding panel is closed. The
front and rear roller sunblinds can be
operated individually.
Operating the front roller sunblind
G
Warning
When opening or closing the front roller
sunblind, make sure no one is in danger of
being injured by the opening or closing
procedure.
The front roller sunblind is equipped with
automatic operation and the anti-entrapment
feature. If the movement of the front roller
sunblind is blocked during the closing
procedure, the front roller sunblind will stop
and retract slightly.
The opening or closing of the front roller
sunblind can be immediately halted by
releasing the roof panel switch or, if the roof
panel switch was moved past the resistance
point and released, by moving the roof panel
switch in any direction.
Overhead control panel
:
To open
;
To open
=
To close
Sliding sunroof
95
Opening and closing
Z