Mercedes-Benz R 350 Operator'S Manual Download Page 64

Page: 64 / 561

Getting started

Driving

The coolant temperature is above
248°F (120°C)

The coolant is too hot and is no longer
cooling the engine.

왘

Stop the vehicle as soon as possible in
a safe location and turn off the engine.
Allow engine and coolant to cool.

왘

Check the coolant level and add cool-
ant if necessary (

컄

page 351).

In case of accident

If the vehicle is leaking fuel:

왘

Do not start the engine under any
circumstances.

왘

Notify local fire and/or police authori-
ties.

If the extent of the damage cannot be de-
termined:

왘

Notify an authorized Mercedes-Benz
Light Truck Center.

If no damage can be determined on the

앫

major assemblies

앫

fuel system

앫

engine mount:

왘

Start the engine in the usual manner.

Summary of Contents for R 350


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands

Mercedes-Benz R 350, Operator'S Manual

Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands