Mercedes-Benz R 350, Operator'S Manual

Page: 264 / 561

263
Controls in detail
Panorama roof with power tilt/sliding panel*
왘
Switch off the ignition (
컄
page 38) and
remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
왘
Switch off the ignition (
컄
page 39).
왘
Open the driver’s door (this puts the
starter switch in position
0 , same as
with the SmartKey removed from the
starter switch). The driver’s door then
can be closed again.
왘
Remove the fuse securing the
tilt/sliding panel from the fuse box
(
컄
page 504).
왘
Reinsert the fuse in the fuse box.
왘
Switch on the ignition (
컄
page 38).
왘
Push and hold the roof panel switch in
direction of arrow
2
(
컄
page 260) un-
til the roller sunblinds are fully closed.
왘
Keep holding the roof panel switch in
direction of arrow
2
(
컄
page 260) for
approximately 1 second.
왘
Pull and hold the roof panel switch in
direction of arrow
1
(
컄
page 260) un-
til the roller sunblinds are fully opened.
왘
Keep holding the roof panel switch in
direction of arrow
1
(
컄
page 260) for
approximately 1 second.
왘
Press and hold the roof panel switch in
direction of arrow
3
(
컄
page 260) un-
til the tilt/sliding panel is fully raised at
the rear.
왘
Push and hold the roof panel switch in
direction of arrow
2
(
컄
page 260) un-
til the tilt/sliding panel is fully closed.
왘
Keep holding the roof panel switch in
direction of arrow
2
(
컄
page 260) for
approximately 1 second.
왘
Open the tilt/sliding panel using the
Express-open feature (
컄
page 262).
If the tilt/sliding panel opens com-
pletely, the roof is synchronized.
If the tilt/sliding sunroof does not open
completely:
왘
Repeat the above steps.
i
For information on which fuse box con-
tains the fuse for the power tilt/sliding
panel, see the fuse chart provided with
the vehicle tool kit (
컄
page 455).