Mercedes-Benz R 350 Operator'S Manual Download Page 135

Page: 135 / 561

134

Controls in detail

Seats

Easy-entry/exit feature for third-row
seats

This feature allows for easier access to and
exit from the vehicle’s third-row seats.

Easy-entry feature for third-row seats

The releases for the easy-entry feature are
located on the entry side and the back of
each second-row seat.

Easy-entry lever

왘

Pull and hold easy-entry lever

in di-

rection of arrow at resistance point.

The seat backrest folds down.

왘

Push the seat forward as far as it will
go.

You should now have sufficient space
to access the vehicle’s third-row seat.

Easy-entry/exit position

For information on how to fold down the
second-row seats completely, see “Folding
second-row seats” (

컄

page 285).

Warning!

To help avoid personal injury, the sec-

ond-row seat backrests must be properly

locked either in the upright position or,

when using the expanded cargo compart-

ment, in the fully folded position while the

vehicle is in motion.

Summary of Contents for R 350


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands

Mercedes-Benz R 350, Operator'S Manual

Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands