Mercedes-Benz R 350, Operator'S Manual

Page: 310 / 561

309
Controls in detail
Useful features
왘
Pull release handle
2
.
The front part of center console
1
is
released from base
3
.
왘
Lift center console
1
in direction of
arrow
4
and hold it there.
왘
While holding center console
1
up,
grip handle
5
.
왘
Lift center console
1
at rear
handle
5
to release the center con-
sole from anchorage points
6
.
왘
Take center console
1
out of the vehi-
cle.
Installing You can install the rear center console in
two different positions. In the most for-
ward position (position 1) you can expand
the cargo compartment fully (
컄
page 284)
without removing the rear center console.
However, for the storage compartment
and the cupholders in the rear center con-
sole to be illuminated, the rear center con-
sole must be installed in the most rearward
position (position 0).
1
Latch (position 1)
2
Latch (position 0)
3
Rear center console base
4
Anchorage point (position 1)
5
Anchorage point (position 0)
i
Rear center console base
3
cannot be
removed.
Warning!
G
The rear center console must be properly in-
stalled on the center console base. Driving
with the rear center console not properly in-
stalled on the rear center console base may
cause the rear center console to come loose
and be thrown around in the vehicle interior,
causing injury to vehicle occupants during
앫
braking
앫
vehicle maneuvers
앫
an accident
컄컄