Mercedes-Benz R 350 Operator'S Manual Download Page 255

Page: 255 / 561

254

Controls in detail

Power windows

Vehicles with KEYLESS-GO*:

왘

Press and hold the lock button on an
outside door handle (

컄

page 68) until

the windows and the roller sunblinds
are completely closed.

왘

Release the lock button on the outside
door handle to interrupt the closing
procedure.

If tilt/sliding panel is open:

왘

Aim transmitter eye of the SmartKey or
SmartKey with KEYLESS-GO* at the
driver’s outside door handle
(

컄

page 251).

The SmartKey or SmartKey with
KEYLESS-GO* must be in close proxim-
ity to the driver’s door handle.

왘

Press and hold button

‹

on the

SmartKey or SmartKey with
KEYLESS-GO* until the windows and
the tilt/sliding panel* are completely
closed.

왘

Release button

‹

on the SmartKey

or SmartKey with KEYLESS-GO* to in-
terrupt the closing procedure.

왘

With the windows and the tilt/sliding
panel completely closed, press and
hold button

‹

on the SmartKey or

SmartKey with KEYLESS-GO* once
more.

The roller sunblinds close.

Vehicles with KEYLESS-GO*:

왘

Press and hold the lock button on an
outside door handle (

컄

page 68) until

the windows and the tilt/sliding panel*
are completely closed.

왘

Release the lock button on the outside
door handle to interrupt the closing
procedure.

왘

With the windows and the tilt/sliding
panel completely closed, press and
hold the lock button on an outside door
handle (

컄

page 68) once more.

The roller sunblinds close.

컄컄

Summary of Contents for R 350


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands

Mercedes-Benz R 350, Operator'S Manual

Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands