Mercedes-Benz R 350 Operator'S Manual Download Page 299

Page: 299 / 561

298

Controls in detail

Useful features

Third-row storage compartment

Storage compartments are located on the
side trims of the third-row seats.

Storage compartment

Parcel nets

Parcel net in front passenger footwell

Parcel net

Parcel nets on front seat backrests

Parcel net

If your vehicle is equipped with a
3-zone automatic climate control*, the
storage compartment is replaced by
adjustable air vents (

컄

page 247).

Warning!

Do not place objects with a combined

weight of more than 4.4 lbs (2 kg) into the

parcel net on the back of the front passen-

ger seat. Otherwise, the Occupant Classifi-

cation System OCS (

컄

page 85) may not be

able to properly approximate the occupant

weight category.

Parcel nets are intended for storing

light-weight items only.

Heavy objects, objects with sharp edges, or

fragile objects may not be transported in the

parcel nets. In an accident, during hard

braking, or sudden maneuvers, they could

be thrown around inside the vehicle and

cause injury to vehicle occupants.

Parcel nets cannot protect transported

goods in the event of an accident.

Summary of Contents for R 350


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands

Mercedes-Benz R 350, Operator'S Manual

Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands