Mercedes-Benz R 350 Operator'S Manual Download Page 261

Page: 261 / 561

260

Controls in detail

Panorama roof with power tilt/sliding panel*

Opening and closing the panorama roof
with power tilt/sliding panel

The tilt/sliding panel is opened and closed
electrically. The switch for the tilt/sliding
panel is on the overhead control panel.

The tilt/sliding panel only operates with
the roller sunblinds opened.

Roof panel switch

Push back to slide roof panel open

Push forward to slide roof panel closed

Push up to raise roof panel

Pull down to lower roof panel

Warning!

When opening or closing the tilt/sliding pan-

el, make sure that there is no danger of any-

one being harmed by the opening or closing

procedure.

The opening procedure of the tilt/sliding

panel can be immediately halted by releas-

ing the switch or, if the switch was moved

past the resistance point and released, by

moving the switch in any direction.

The closing procedure of the tilt/sliding

panel can be immediately halted by releas-

ing the switch.

The panorama roof with power tilt/sliding

panel is made out of glass. In the event of an

accident, the glass may shatter. This may re-

sult in an opening in the roof.

Summary of Contents for R 350


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands

Mercedes-Benz R 350, Operator'S Manual

Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands