Mercedes-Benz R 350 Operator'S Manual Download Page 482

Page: 482 / 561

481

Practical hints

Flat tire

Removing the wheel

Alignment bolt

왘

Unscrew upper-most wheel bolt and
remove.

왘

Replace this wheel bolt with alignment
bolt

supplied in the vehicle tool kit

(

컄

page 454).

왘

Remove the remaining wheel bolts.

왘

Remove the wheel.

Mounting the spare wheel

Wheel bolt for 18" and 19" light alloy
wheels

Wheel bolt for 17" light alloy wheels or
collapsible tire (located in trunk with
spare wheel)

Warning!

The jack is intended only for lifting the

vehicle briefly for wheel changes. It is not

suited for performing maintenance work

under the vehicle.

앫

Never start the engine when the vehicle
is raised.

앫

Never lie down under the raised vehicle.

Do not place wheel bolts in sand or dirt.
This could result in damage to the bolts
and wheel hub threads.

Wheel bolts

must be used when

mounting the spare wheel with collaps-
ible tire. The use of any wheel bolts oth-
er than wheel bolts

for the spare

wheel with collapsible tire will physical-
ly damage the vehicle’s brakes.

Summary of Contents for R 350


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands

Mercedes-Benz R 350, Operator'S Manual

Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands