Mercedes-Benz R 350 Operator'S Manual Download Page 253

Page: 253 / 561

252

Controls in detail

Power windows

Vehicles without tilt/sliding panel

왘

Press and hold button

on the

SmartKey or SmartKey with
KEYLESS-GO* until the windows and
the tilt/sliding sunroof* have reached
the desired position.

왘

Release button

on the SmartKey

or SmartKey with KEYLESS-GO* to in-
terrupt the opening procedure.

Vehicles with tilt/sliding panel*

If roller sunblinds are closed:

왘

Press and hold button

on the

SmartKey or SmartKey with
KEYLESS-GO*.

The windows and roller sunblinds begin
to open after approximately 1 second.

왘

Release button

on the SmartKey

or SmartKey with KEYLESS-GO* to
interrupt the opening procedure.

왘

With the windows and roller sunblinds
fully opened, press and hold
button

on the SmartKey or

SmartKey with KEYLESS-GO* once
more.

The tilt/sliding panel opens.

왘

Release button

on the SmartKey

or SmartKey with KEYLESS-GO* to in-
terrupt the opening procedure.

If roller sunblinds are open:

왘

Press and hold button

on the

SmartKey or SmartKey with
KEYLESS-GO*.

The windows and the tilt/sliding panel
begin to open after approximately
1 second.

왘

Release button

on the SmartKey

or SmartKey with KEYLESS-GO* to in-
terrupt the opening procedure.

Convenience closing feature

When locking the vehicle, you can close
the windows and the tilt/sliding sunroof*
(or tilt/sliding panel*) simultaneously.

Warning!

When closing the windows and the

tilt/sliding sunroof* (or tilt/sliding panel*),

make sure that there is no danger of anyone

being harmed by the closing procedure.

If potential danger exists, proceed as fol-

lows:

앫

Release button

‹

to stop the closing

procedure. To open, press and hold but-
ton

. To continue the closing proce-

dure after making sure that there is no
danger of anyone being harmed by the
closing procedure, press and hold but-
ton

‹

Summary of Contents for R 350


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands

Mercedes-Benz R 350, Operator'S Manual

Search results

Summary of Contents for R 350

Reviews:

Related manuals for R 350

Brands by name

Popular brands