cally after authorisation. Further information on
using a mobile phone with the multimedia sys-
tem (see the Digital Owner's Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see the
manufacturer's operating instructions).
Only one mobile phone can be connected to the
multimedia system at any one time.
Searching for a mobile phone
Multimedia system:
X
Select
Tel/
Tel/
®Q
Connect
Connect
device
device
Q
Search for phones
Search for phones
Q
Start
Start
search
search
.
The available mobile phones are displayed.
Symbols in the device list
Sym-
bol
Explanation
Ï
New mobile phone found, not yet
authorised.
Ñ
Mobile phone is authorised, but is
not connected.
#
Mobile phone is authorised and
connected.
Connecting the mobile phone
Authorisation using Secure Simple Pairing:
X
Select mobile phone.
A code is displayed in the multimedia system
and on the mobile phone.
X
If codes match: select
Yes
Yes
on the multimedia
system.
X
Confirm code on the mobile phone. Depend-
ing on the mobile phone used, confirm the
connection to the multimedia system and for
the PBAP and MAP Bluetooth
®
profiles. The
prompt to confirm may take up to two
minutes to be displayed (see the manufactur-
er's operating instructions).
X
If the codes are different: select
No
No
on the
multimedia system.
The process is cancelled.
Repeat authorisation.
Authorisation by entering a passkey:
X
Select Bluetooth
®
name of the mobile phone.
The input menu for the passkey is displayed.
X
Choose a one to sixteen-digit number combi-
nation as a passkey.
X
Enter the passkey on the multimedia system.
X
Press
¬
to confirm.
X
Enter and confirm the passkey on the mobile
phone. Depending on the mobile phone used,
confirm the connection to the multimedia sys-
tem and for the PBAP and MAP Bluetooth
®
profiles. The prompt to confirm may take up
to two minutes to be displayed (see the man-
ufacturer's operating instructions).
i
Mobile phones which are connected to the
optionally available telephone module with
Bluetooth
®
(SAP profile) are displayed sepa-
rately in the device list. These are found below
the entry
MB SAP module phones
MB SAP module phones
.
Switching between mobile phones
If you have authorised more than one mobile
phone, you can switch between the individual
phones.
Multimedia system:
X
Select
Connect device
Connect device
.
X
Select a mobile phone from the device list.
Telephone module with Bluetooth
®
(SAP profile)
Introduction
The module can be used as a permanently instal-
led telephone with its own SIM card
(
Y
page 268) or in conjunction with a mobile
phone (
Y
page 269).
If you wish to use the module in conjunction with
your mobile telephone, the mobile phone must
support the Bluetooth
®
SAP profile (SIM Access
Profile).
The following functions are available using the
module:
R
hands-free mode
R
data modem mode (
Y
page 269)
R
sending and receiving text messages
(
Y
page 270)
Operating system
267
Multi
media
sys
tem
Z