Adaptive Highbeam Assist Plus cannot take into
account road, weather or traffic conditions.
Adaptive Highbeam Assist Plus is only an aid.
You are responsible for adjusting the vehicle's
lighting to the prevailing light, visibility and traf-
fic conditions.
In particular, the detection of obstacles can be
restricted if there is:
R
poor visibility, e.g. due to fog, heavy rain or
snow
R
dirt on the sensors or if the sensors are
obscured
Switching Adaptive Highbeam Assist
Plus on/off
X
To switch on: turn the light switch to
Ã
.
X
Press the combination switch beyond the
pressure point in the direction of arrow
:
.
The
_
indicator lamp in the multifunction
display lights up when it is dark and the light
sensor switches on the dipped-beam head-
lamps.
At speeds above approx. 25 km/h: the
headlamp range is automatically controlled
according to the distance to other road users.
At speeds above approx. 30 km/h:
R
If no other road users are detected, the
main-beam headlamps are automatically
switched on.
R
If other road users are detected, the partial
main-beam headlamps are automatically
switched on.
The
K
indicator lamp in the instrument
cluster also lights up.
At speeds below approx. 25 km/h or
when there is sufficient street lighting:
R
The partial main-beam headlamps are
switched off automatically.
R
The main-beam headlamps are switched off
automatically.
The
K
indicator lamp in the instrument
cluster goes out. The
_
indicator lamp in
the multifunction display remains lit.
X
To switch off: move the combination switch
back to its normal position or move the light
switch to another position.
The
_
indicator lamp in the multifunction
display goes out.
Headlamps misted up on the inside
Certain climatic and physical conditions may
cause moisture to form in the headlamp. This
moisture does not affect the functionality of the
headlamp.
Interior lighting
Overview of interior lighting
:
u
Switches the interior lighting on/off
;
|
Switches the automatic interior light-
ing control on/off
=
p
Switches the right-hand reading lamp
on/off
?
c
Switches the front interior lighting on/
off
A
p
Switches the left-hand reading lamp
on/off
Interior lighting control
General notes
In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time
except for when the key is in position 2 in the
ignition lock.
Automatic interior lighting control
X
To switch on/off: press the
|
button.
When the automatic interior lighting control is
switched on, the button is flush with the over-
head control panel.
118
Interior lighting
Li
ghts
and
wind
scr
een
wip
er
s
