after a cold start. This helps the catalytic con-
verter to reach its operating temperature
more quickly.
Hill start assist
Hill start assist helps you when pulling away for-
wards or in reverse on an uphill gradient. It holds
the vehicle for a short time after you have
removed your foot from the brake pedal. This
gives you enough time to move your foot from
the brake pedal to the accelerator pedal and
depress it before the vehicle begins to roll.
G
WARNING
After a while, hill start assist no longer holds
the vehicle and it may roll away. There is a risk
of an accident and injury.
Therefore, quickly move your foot from the
brake pedal to the accelerator pedal. Never
leave the vehicle when it is held by hill start
assist.
Hill start assist is not active if:
R
you are pulling away on a level road or a
downhill gradient
R
on vehicles with automatic transmission, the
transmission is in position N
R
the parking brake is applied
R
ESP
®
is malfunctioning
ECO start/stop function
Introduction
The ECO start/stop function switches the
engine off automatically if the vehicle is stopped
under certain conditions.
When pulling away again, the engine starts auto-
matically. The ECO start/stop function thereby
helps you to reduce the fuel consumption and
emissions of your vehicle.
Important safety notes
G
WARNING
If the engine is switched off automatically and
you exit the vehicle, the engine is restarted
automatically. The vehicle may begin moving.
There is a risk of accident and injury.
If you wish to exit the vehicle, always turn off
the ignition and secure the vehicle against
rolling away.
General notes
:
ECO start/stop display
The ECO start/stop function is activated when-
ever you start the engine using the key or the
Start/Stop button.
If the
¤
symbol is shown in green in the mul-
tifunction display, the ECO start/stop function
switches the engine off automatically if the vehi-
cle stops moving.
If the ECO start/stop function has been man-
ually deactivated (
Y
page 143) or a malfunction
has caused the system to be deactivated, the
¤
symbol is not displayed.
Automatic engine switch-off
General notes
The ECO start/stop function is operational and
the
¤
symbol is displayed in green in the
multifunction display, if:
R
the indicator lamp in the ECO button is lit
green
R
the outside temperature is within the range
that is suitable for the system
R
the engine is at normal operating temperature
R
the set temperature for the vehicle interior
has been reached
R
the battery is sufficiently charged
R
the system detects that the windscreen is not
misted up when the air-conditioning system is
switched on
R
the bonnet is closed
R
the driver's door is closed and the driver's
seat belt is fastened
If the conditions for automatic engine switch-off
are not all fulfilled, the
¤
symbol is shown in
yellow.
142
Driving
Driv
ing
and
pa
rk
ing