i
All of the vehicle's systems remain active
when the engine is switched off automati-
cally.
i
The engine can be switched off automati-
cally a maximum of four times (initial stop,
then three subsequent stops) in succession.
The
¤
symbol is shown in yellow in the
multifunction display after the engine has
been started automatically for the fourth
time. When the
¤
symbol is shown in
green in the multifunction display, automatic
engine switch-off is again possible.
Vehicles with manual transmission
The ECO start/stop function switches off the
engine automatically at low speeds.
X
Brake the vehicle.
X
Shift to neutral N (follow gearshift instruc-
tion
:
to engage neutral N, if necessary).
X
Release the clutch pedal.
The engine is switched off automatically.
Vehicles with automatic transmission
If the vehicle is braked to a standstill with the
transmission in D or N, the ECO start/stop func-
tion switches off the engine automatically.
i
The HOLD function can be activated if the
engine has been switched off automatically. It
is then not necessary to continue applying the
brakes during the automatic stop phase.
When you depress the accelerator pedal, the
engine starts automatically and the braking
effect of the HOLD function is deactivated.
Automatic engine start
General notes
The engine is started automatically if:
R
you switch off the ECO start/stop function by
pressing the ECO button
R
you engage reverse gear R
R
you unfasten your seat belt or open the driv-
er's door
R
the vehicle starts to roll
R
the brake system requires this
R
the temperature in the vehicle interior devi-
ates from the set range
R
the system detects moisture on the wind-
screen when the air-conditioning system is
switched on
R
the battery's charge status is too low
Vehicles with manual transmission
!
Only engage gear when the clutch pedal is
depressed.
The engine is started automatically if you:
R
depress the clutch pedal fully
R
depress the accelerator pedal
Vehicles with automatic transmission
The engine is started automatically if you:
R
release the brake pedal in transmission posi-
tion D or N when the HOLD function is not
active
R
depress the accelerator pedal
R
move the transmission out of position P
i
Shifting the transmission to position P does
not start the engine.
i
If you shift the transmission from R to D, the
ECO start/stop function is available again
once the
¤
symbol reappears in green in
the multifunction display.
Deactivating/activating the ECO start/
stop function
Driving
143
Dr
ivi
ng
an
d
parki
ng
Z