Mercedes-Benz 602, Service Manual

Page: 37 / 324

Air conditioner:
Condenser
Coolant hoses
Fan (14, 15) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air conditioner:
Poly-V-belts (13)
Refrigerant compressor (12)
Vacuum hoses and fuel lines
Models 124 and 126:
Control cable (230)
Model 201:
Engine control linkage (7)
Electrical connection lines
Oil pressure switch and oil level sensor
Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alternator
Engine electrical harness (5)
Power steering pump (10) . . . . . . . . . . . . . . . . .
Caution!
Attach protective plate immediately after
removing radiator.
disconnect between engine and chassis, pull
off, install (item 9).
remove, install, 25 Nm and 45 Nm
(items 10 11).
Note
On vehicles with viscodrive fan clutch
Use screwdriver socket 103 589 01 09 99,
torque wrench 001 589 72 21 00 and holding
tool 603 589 00 40 00.
remove, install (13-342).
remove, install, 25 Nm (item 12).
Note
Do not unbolt the refrigerant lines on the
compressor. Fasten compressor to chassis at
side.
remove between engine and chassis,
disconnect, reinstall (item 13).
for engine control, unhook, hook in (item 14).
unhook, hook in (item 15).
Note
Adjust control linkage (30-300).
between engine and chassis, disconnect plug
connectors and connections, reconnect
(item 16).
disconnect plug connectors, reconnect
(item 17).
unbolt connection lines, connect (item 18).
disconnect plug connectors, reconnect
(item 19).
remove, reattach (item 20).
evacuate oil out of power steering supply
reservoir, use hand pump 112 589 00 72 00
and remove oil lines, reinstall, 30 Nm
(items 21 22).
01.10