Mercedes-Benz 602, Service Manual

Page: 85 / 324

17 Remove all remaining hex. head bolts
(arrows) in timing case cover and remove timing
case cover.
Caution!
When removing timing case cover be careful of
cylinder head gasket and oil pan gasket. Avoid
damaging. Replace damaged gaskets.
Installation note
Clean gasket residues off of parting surface
on timing case cover.
Check crankshaft radial seal in timing case cover
and replace, if required, installation sleeve
timing case cover
Tightening torque
601 589 03 14 00.
Coat parting surface of
sealant 001 989 25 20.
25 Nm.
18 Assemble in opposite order.
19 After installation warm up engine and
timing case cover for leakage.
with
check
01.10 210110