Mercedes-Benz 602, Service Manual

Page: 65 / 324

Cylinder bores bore out to standard diameter and hone,
see Note in (01-l 10). Observe group code
letters (A, X, B) (items 5 9).
Diameter for cylinder sleeves
Standard
There are no stages for sleeves.
Dimensions for basic bore in block
602, 603
Cylinder dia. D in mm
87.000 87.006
over 87.006 87.012
over 87.012
87.018
Bore dia.
92.650 92.750 mm
Bore dia.
90.550
90.650 mm
Bore dia.
90.000 90.935 mm
Depth “A” sleeve seat
3.8 4.0 mm
Depth sleeve seat
4.77 5.23 mm
Permissible out-of-round of basic bore in block
0.01 mm
Permissible out-of-round and conicity of cylinder bore
0.07 mm
Permissible roughness of cylinder bore
Permissible waviness of cylinder bore
l-loning angle
Roughness of block parting surface
Chamfer of cylinder bores
0.003 0.006 mm
50 of roughness
45”
0.006 0.016 mm
30”
01 10