Mercedes-Benz 602, Service Manual

Page: 109 / 324

Cylinder head removed:
1 When the cylinder head is removed the
scope of work for refinishing is the same except
for items 5 and 7. Instead of items 5 and 7
measure the projection dimension (c).
Cylinder head installed:
2 Plug or seal off prechamber mounting bores
toward combustion chamber (e.g. with rag), so
that chips cannot get into the combustion
chamber.
3 Remove protective sleeve from
countersinking tool 601 589 00 66 00.
4 Install countersinking tool 601 589 00 66 00
into the prechamber mounting bore to be
refinished down to the stop.
5 Measure interval between top of shaft
(01) and top of sleeve (02) and note value.
Note
When the cylinder head is installed, measuring
the interval replaces measuring the
projection dimension “C”.
01.10 41014