Menicon ShellPa Pro, Instruction Manual, Page: 25 / 32

SP_Inst02 /02_20220208 Instruction Manual For ShellPa Pro (Model type : STMP) Page(25/32)
Lifescience Dept. Menicon Co.,Ltd.
7. “ Parameter s” screen
7.1. ” Ca Time ”
You can change and set, calender and time.
On “Parameter s ” screen , please touch Number which you want to change, after, “Key pad” will be
displayed on the screen. Please change number.
7.2. ” Hour Meter ”
You can check total operation time on this machine.
But you cannot change this number, check only.
7.3. ” Set Position ” and “Pin Gap Adjust”
These parameters mean,
“ Set Position ”: Position to set “Chamber holder” parts
(Atte ntion: When you change “Set Position”, Machine require turn off and on. Please conduct it.)
“Pin Gap Adjust”: Position that machine consider as Stretch ratio 0%.
Please understand below movement.
==========
--- Main switch on: “ Origin(0.0mm) ” → “Set Position” (Stationary)
--- Push “Start”:
“Set Position” → “Pin Gap Adjust”
---
“Pin Gap Adjust + Stretch ratio position”