SP_Inst02 /02_20220208
Instruction Manual For ShellPa Pro (Model type : STMP)
Page(15/32)
Lifescience Dept. Menicon Co.,Ltd.
D=
(First time) Relax movement time to non-
stretch initial position
0.25 --- 30.00sec.
E=
(First time) Standstill time on relax (non-
stretch initial position)
0.0 sec. --- 86400.0sec.(24h.)
F=
(Second time) Stretch movement time to
specified stretch ratio (length)
0.25 --- 30.00sec.
G=
(Second time) Standstill time on stretch
0.0 sec. --- 86400.0sec.(24h.)
H=
(Second time) Relax movement time to
non-stretch initial position
0.25 --- 30.00sec.
I=
(Second time) Standatill time on relax
(non-stretch initial position)
0.0 sec. --- 86400.0sec.(24h.)
3.3. Operating to start and stop
<Start operation>
1.
Chose which pattern of stretch, on “main menu”
screen.
Display will go to “Operating Pattern”
screen, you had chosen.
On “Operating Pattern”
screen,
when equipment stop, “START” button is flashing and “STOP”
button is lighting.
And, “SET Position”
is displayed and its around area lights. (
“SET Position”
indicates that
“
stretch and relax point
(bar)”
is located on origin.).
2.Push “START” button on “Operating Pattern”
screen.
After operation, Stretch and relax movement will start.
On stretch and relax movement,
“START” button is lighting and “STOP” button
lighting off.
And,
displayed “
NO SET Position
”
and not light its around area
. (“
NO SET Position
” indicates
that
“
stretch and relax point (bar)
”
is not located on origin.).