SP_Inst02 /02_20220208
Instruction Manual For ShellPa Pro (Model type : STMP)
Page(22/32)
Lifescience Dept. Menicon Co.,Ltd.
6. Data output to USB, and viewing images on a computer (Data Display screen)
“Shell
P
a Pro”
can store data of stretch and relax movement in USB, and on PC, you can check.
6.1. Set SD card
If SD card and parameters of setting SD card has been set, Bar graph and volume number of setting
SD card
is displayed on “Main menu”
screen. (If SD card and parameters is not set,
“Memory No Set”
or “NO SET”
will be displayed.). Please check.
(Attention: Ordinary, we insert and set 8Gbyte SD card, and shipped. Therefore, below work, you
generally not need.)
(Attention: Changing parameters of SD card, or taking out and in SD card, clear (reset) bar graph,
because this bar graph directly does not check SD card.)
<SD card insert>
On case
of no SD card, “Memory No Set” is
displayed on “Main menu” screen.
SD card inserts place, please refer to photo
below
on “Control unit”
.
You must open “Control unit”
.
Please attention!!, Each control equipment,
Connecter,
and cable…
< Setting parameters of setting SD card>
Not setting Volume number
parameters of setting SD card, ”NO SET” is displayed on “Main menu”
screen.
You can set volume number parameters of setting SD card
on “Parameters” screen.
On “Parameters” screen, please check “Memory Capacity Setting”.
Please press and hold volume number button which volume of inserting SD card is equal to , on
“Stretch
-
Stop system Monitoring” screen, for 3 seconds and more.
When setting, volume number button is colored with yellow.
Bar graph
Volume number
of setting SD card