SP_Inst02 /02_20220208
Instruction Manual For ShellPa Pro (Model type : STMP)
Page(2/32)
Lifescience Dept. Menicon Co.,Ltd.
＜
Table of contents
＞
1. Preparing the equipment
-------------------------------P4
1.1. Checking the supplied items
-------------------------------P4
1.2. Identifying parts
-
-------------------------------P5
1.3. Setting and connecting of each items
-------------------------------P6
1.4. Switch on and check initial position (original point).
-------------------------------P7
1.5. Interface layout and Summary of each interface
-------------------------------P8
2. Preparing for stretch culture ( Seeding on stretch chamber)
-------------------------------P10
3. Basic function and operation
-------------------------------P11
3.1. Selecting stretch pattern
-------------------------------P11
<Pattern A (Sq., Tri., ST.): Square wave + Standstill>
<Pattern B1 (Sin.): Sine wave>
<Pattern B2 (Int.-Sin.): Sine wave + Standstill>
<Pattern C: Twice, square wave + Standstill>
3.2. Setting stretch and relax parameter
-------------------------------P13
<Setting Stretch ratio>
< Setting Stretch and relax speed (time)>
3.3. Operating to start and stop
-------------------------------P15
<Start operation>
<Stop operation>
<Forced Stop>
4. "Cycle Stop system" mode
-------------------------------P17
4.1. "Cycle Stop system" mode Setting
-------------------------------P17
4.2. "Cycle Stop system" mode operation
-------------------------------P17
<"Cycle Stop system" mode “START” and “STOP” operation>
<Operation on counting up "Cycle Stop system">
5. "Stretch-Stop system" mode
-------------------------------P19
5.1. "Stretch-Stop system" mode ON/OFF
-------------------------------P19
5.2. "Stretch-Stop system" mode Setting
-------------------------------P19
5.3. "Stretch-Stop system" mode Monitoring
-------------------------------P20
5.4. "Stretch-Stop system" mode operation
-------------------------------P20
<"Stretch-
Stop system" mode “START” and ”STOP” operation>
<Operation on counting up "Stretch-Stop system">
6. Data output to USB, and viewing images on a computer (Data Display screen)
------P22
6.1. Set SD card
-------------------------------P22
<SD card insert>
< Setting parameters of setting SD card>
6.2. Store data of stretch and relax movement in USB
-------------------------------P23