SP_Inst02 /02_20220208
Instruction Manual For ShellPa Pro (Model type : STMP)
Page(18/32)
Lifescience Dept. Menicon Co.,Ltd.
4.2. "Cycle Stop system" mode operation
<"Cycle Stop system"
mode “START”
and “STOP”
operation>
You can set
“Cycle Stop system” mode
ON and OFF on “Operating Pattern”
screen.
Please touch “
Cycle Stop
” on “Operating Pattern”
screen. You can change
“Cycle Stop system” mode
ON and OFF, touching “Cycle Stop”
on “Operating Pattern” screen
.
When
“Cycle Stop”
on “Operating Pattern” screen,
is
lighting (Colored with yellow), “Cycle Stop
system” set ON.
That time (“Cycle Stop system” set ON.)
, number of stretch and relax cycle until stop,
as “Remaining
Count”
on “Operating Pattern” screen,
is displayed.(
“Remaining Count”
on “Operating Pattern
setting
” screen
, is displayed
in “Remaining Count” on “Operating Pattern” screen
.)
(When
“Cycle Stop” on “Operating Pattern” screen, is not light, “Cycle Stop system” set OFF. That
time (“Cycle Stop system” set OFF.), That “Remaining Count” is “0”, is displayed.)
“START” and ”STOP” operation
is identical with a standard
“START” and ”STOP”
operation. Please
refer to
“
3.3. Operating to start and stop
”
. After starting,
“Remaining Count”
will decrease, every
time cycle is over.
<Operation on counting up "Cycle Stop system">
C
ounting up “Cycle Stop system”
(
Remaining Count” is “0”), “START” and ”STOP” not light, and
“Cycle Stop”
button flash, and “Cycle Stop” sign is displayed, on “Operating Pattern” screen
.