57
PICTURE CD BASIC OPERATION
Press the STANDBY ON/OFF button to turn on the unit.
After a few seconds, the Source mode (TV Tuner, Front AV,
Front SV, Rear AV, etc.) screen will appear.
2
1
1
Press the OPEN/CLOSE button to open the disc tray,
“OPEN” will appear on the screen. Insert a picture disc with
the label side facing up on the disc tray. Press the
OPEN/CLOSE button to close the disc tray. "LOADING" will
appear on the screen.
2
2
After loading, playback will start automatically. Press the
Skip (
n
)
1
or (
o
)
2
button to skip through the pictures. The
unit will playback all the pictures on the disc, then the
Pictures Index menu will appear on the TV screen.
If playback does not start automatically, proceed to Step 4.
1
2
3
3
Use the Navigation (
√
,
®
,
π
,
†
) buttons
1
to select the
desired picture and press the ENTER button
2
to playback
the desired picture again. To view the next or previous
page of the Pictures Index menu, select “>>” or “<<” icon at
the right bottom side of the screen using the Navigation
(
√
,
®
,
π
,
†
) buttons
1
, then press the ENTER button
2
.
2
1
4
PLAYBACK OF A PICTURE CD
While in the Playback mode, repeatedly press the REPEAT button to
cycle through the Playback modes as follows:
Single:
Only plays the picture which you selected in the Pictures
Index menu; then the Pictures Index menu will appear again.
Repeat One:
The picture which you selected in the Pictures Index
menu will play continuously. (NOTE: To return to the Pictures Index
menu, press the Stop (
X
) button.)
Repeat Folder:
All the pictures will playback continuously. (NOTE: To
return to the Pictures Index menu, press the Stop (
X
) button.)
Folder:
All the pictures will playback once; then it will return to the
Pictures Index menu.
2
1
PLAYBACK MODE
