12
CONNECTION-OUT (CONTINUED)
CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK
NOTES FOR CONNECTING TO A TV:
• If your TV has a Component input, connect the DVD recorder with the component cable for best
results, otherwise use the S-Video or Video OUT jack(s) on the DVD recorder.
• Set the TV’s TV/VIDEO button or switch to the S-VIDEO setting.
• When connecting the DVD Recorder, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the DVD Recorder to the TV, make sure the power is off and both units are
unplugged before making any connections.
• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local
electronics supply store.
• Connect the DVD recorder to your TV directly. If you connect the DVD recorder through a VCR, the
playback picture will be distorted because DVD video discs are copy protected.
• Connect a cable, etc. signal as described on page 10 to use the tuner capabilities of this unit.
• Do NOT use the yellow video cable when connecting the unit with the S-video cable.
