8
PN: 81127
Rev 4, 6/2017
1.0
STVI Introduction
The
STVI
is a user friendly interface to control the
Megger SPI
test equipment. This manual contains the
information that you will need in order to set up and use your STVI with the SPI Device. How the unit
operates, some of the different types of testing you can do, and how to save and view your test results
with the Smart Touch View Interface software is described. It also covers running the STVI software
using the PowerDB software on your PC.
1.1
Smart Touch View Interface
Figure 1 - Smart Touch View Interface
1.
TFT LCD Color Display
– this 8.5 inch touch panel display
provides high resolution, and features
Wide Viewing Angle Technology with high luminance for reading in direct sunlight.
2.
Control Knob
– this knob will adjust values once the box location of the value to be changed is
selected.
Figure 2 - STVI Rear-View
3.
Built-in Foldout Stand
– the STVI may be operated as a handheld controller, or foldout the
built-in stand and use a desktop controller.
4.
STVI Ethernet Port
– this Ethernet port is a 10/100BaseTX PoE (Power over Ethernet) port, and
is the SPI connection port.
