Megger PPX30, User Manual, Page: 81 / 84

Appendix D — Specifications
Electrical Specifications
Specfication—Surge Test Baker PPX30 Baker PPX40 Baker PPX30A
Maximum output voltage 30,000V 40,000V 30,000V
Maximum output current with
leads shorted together 1400A 2600A 1400A
Maximum impulse energy 45J 120J 45J
Accuracy 12% 12% 12%
Specfication—DC HiPot Test Baker PPX30 Baker PPX40 Baker PPX30A
Maximum output voltage 30,000V 40,000V 30,000V
Voltage accuracy 3% 3% 3%
Maximum output current 1000µA 1000µA 1000µA
Current accuracy 5% 5% 5%
Overcurrent trip 12/120/1200µA 12/120/1200µA 12/120/1200µA
Current resolution 1/10/100µA 1/10/100µA 1/10/100µA
Specfication—Armature bar-to-bar test Baker PPX30A only
Maximum voltage
(no load) 2100V
Maximum current 7000A
Maximum pulse energy 45L
Maximum test inductance 20 µH
Minimum test inductance
0.4 µH
General Specifications
Specfication Baker PPX30 Baker PPX40 Baker PPX30A
Weight 310 lbs (141 kg) 290 lbs (132 kg) 321 lbs (146 kg)
Dimensions 24 x 48 x 33 in
(610 x 1219 x 838 mm) 24 x 48 x 33 in
(610 x 1219 x 838 mm) 24 x 48 x 33 in
(610 x 1219 x 838 mm)
Power
requirements 100 - 120V, 5A, 60 Hz, 500W
200 - 240V, 3A, 50 Hz, 600W 100 - 120V, 5A, 60 Hz, 500W
200 - 240V, 3A, 50 Hz, 600W 100 - 120V, 5A, 60 Hz, 500W
200 - 240V, 3A, 50 Hz, 600W
Test leads 3 1 3 + 1 (armature)
Operates with Baker AWA, DX Baker DX Baker AWA, DX
Environmental Specifications
Specfication Detail
Operating temperature range
and humidity Only operate the tester in temperatures ranging from 5 to 40° C (41 to 104° F).
This unit is for use at a maximum relative humidity of 80% for temperatures up
to 31 °C (88 °F), decreasing linearly to 50% relative humidity at 40° C (104° F).
Maximum altitude The unit has been tested for use up to 2,000 m (6,500 ft.).
Pollution degree II
This unit is intended for Installation Category II in a Pollution Degree II
environment.
(From IEC 61010-1 3.6.6.2) Only non-conductive pollution occurs. However,
temporary conductivity caused by condensation is expected.
www.megger.com 73