Setting up an Armature Surge Test
Create an appropriate Test ID and Motor ID for the device to be tested. Refer to the “Creating Test and Motor IDs,
and Setting Up the Tests” section in this guide for a brief review. Refer
to the
Baker AWA-IV User Guide
for more
detailed information.
The specific settings that affect armature testing using a Baker AWA and PPX30A power pack appear within the
Surge Test
and
Armature Test
setup windows.
1. With the proper Motor ID selected, click on the
Tests
tab.
2. Ensure that the correct Test ID for the device appears in the
Test ID
field.
3. Check the
Edit Test ID
box.
4. Enter the current password for editing Test IDs in the dialog box when requested.
5. Click the far right button in the
Surge Test
row to open the
Surge Test
setup window.
Fig 42:
Tests tab; selecting Surge Test setup to access armature testing parameters.
Using Power Packs with Baker AWA Testers
www.megger.com 45
Summary of Contents for PPX30
