Running the Combined Baker DX and Power Pack Tests
1. Run the RLC tests using the DX host only and its associated test leads. Follow procedures as described in the
Baker DX User Guide
for these tests.
Megohm and DA/PI DX tests can be run either from the DX host unit or the PPX. Depending on the motor size being
tested and the DX model being used, you might find advantages such as higher resolution when running these tests
on the DX host. In most cases, you will use the PPX to run these tests—this example uses the PPX.
NOTE: One advantage to running the Megohm/PI tests using the PPX is the ability to capture complete DC Test
results in one report screen.
2. After completing all tests run on the DX host and saving their results to the appropriate location, disconnect the
Baker DX tester leads and set them safely aside.
3. Connect the power pack’s test leads as described in the “Power Pack Configuration for DC HiPot Tests” for the
power pack you will be using.
DC Test Procedures When Using Power Packs
NOTICE: For DC HiPot tests using the Baker PPX40, the Surge range switch must be in the 25–40k position.
1. When performing a comprehensive test on a motor, the RLC tests are conducted using the DX host.
2. After completing those tests, you should already have the desired folder and record selected.
Fig 48:
DC tests start screen.
3. To prepare to conduct Step Voltage or DC HiPot tests with the power pack, ensure that the DX host leads are
disconnected and the power pack leads connected.
4. Touch the
Configuration Options
icon then the
Power Pack
icon. Your start screen should look similar to the
example shown above.
Using Power Packs with Baker DX Testers
52
Baker Power Packs User Guide 71-061RC EN V2
www.megger.com
Summary of Contents for PPX30
