Megaleds Orphos, Installation Handbook, Page: 75 / 100

71
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM REVISION - 02 (MAY, 2020
th
)
PROBLEM CAUSE SOLUTION
8. The Horn
does not
sound
1. The Horn Set (12) is damaged.
1. REPLACE the Horn
Set (12) by same code.
VERIFY Chapter 11 - SPARE PARTS
or CONSULT the Technical Support
MEGALEDS.
2. The SA1 Push Button is damaged
or disconnected from the Boat Power
Electric Whip (46).
2. INSPECT and REPLACE the SA1
Push Button or CONNECT the corre-
spondent cable.
3. The Horn Set correspondent ca-
ble of the Boat Power Electric Whip
(1246) is broken or damaged.
3. INSPECT and REPAIR the corre-
spondent cable of the Boat Power
Electric Whip (46).
4. The Horn Set correspondent ca-
ble of the Power Electric Whip (47) of
Female Connector (47) is broken, or
damaged in the pins, disconnected,
bad contact or oxidized.
4. INSPECT and REPAIR the corre-
spondent cable of the Female Con-
nector Power Electric Whip (47).
5. The Central PCI Board (10) is dam -
aged or correspondent cable (BROWN)
is disconnected or damaged.
5.
REPLACE
the Central PCI Board
(10), however CONSULT the Technical
Support MEGALEDS.
6. The Horn Set (12) is loose and has
ruptured one of the power cable, or
the damaged Connectors (30) (40),
or with a oxidized pin (s) or a broken
cable.
6. REPAIR the fixation of the Horn Set
(12). CONSULT Technical Support ME -
GALEDS.
7. F1 Fuse (10A) burnt
7. REPLACE F1 Fuse (10A) and VERI-
FY the cause of occurrence. If neces-
sary, CONSULT Technical Support.