Megaleds Orphos, Installation Handbook, Page: 52 / 100

48
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM
REVISION - 02 (MAY, 2020
th
)
2. PASS the Bracket Bolted Set (35) by the middle of Extensive Base Set
(44), according to figure 29, until this assembly completely passes;
figure 29: Mounting and positioning the Exten-
sive Base Set (44) relative to the Bracket Bolt-
ed Set (35)
3. POSITION the 8 Fixing Bolts (49) of Extensive Base Set (44) (specifica -
tion: slotted or Phillips bolts Ø ¼ inch x 1inch) (figure 30B) through the inner holes
(Ø 8 mm) of the lower surface of the Extension Base Set (44), to be screwed into
the Guide Bushings (45) (figure 22 and 25);
4. TIGHTEN all Bolts (49), according to figure 25;
5. APPLY white or black Silicone Sealant around the hole Ø 25 mm the
Bracket Bolted Set (), that is, in the passage of the Female Connector Power Elec-
tric Whip (48) (inside the Extensive Base (44), for seal this passage as the water
inlet (figures 30A and 30B);
6. CERTIFY if the cable sealing process is well performed;
targa or top of
the boat
35
44