Megaleds Orphos, Installation Handbook, Page: 50 / 100

46
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM
REVISION - 02 (MAY, 2020
th
)
15. REMOVE the burrs with a round file and sandpaper from the holes;
16. CLEAN the surface of the targa, removing dust and chips.
17. SEPARATE the 8 C-Toogle Nylon Anchors (38) of ¼ inch;
18. BEND the metallic part over the strips (figure 20A);
19. INSERT the set in one of the holes Ø
½ inch (Ø 13mm),
according to
figure 20A;
20. APPLY in the hole Ø ½ inch (or Ø 13 mm) white or black Silicone Seal-
ant to seal the Guide Bushing (45) on the targa or the top of the boat (see figure 22);
21. POSITION and FIT the Guide Bushing (45) in the hole;
22. PUSH the Guide Bushing (45) toward external surface of targa or the
top of the roof (outward) (figure 20C);
23. PULL and CUT the plastic strips according to figure 20C;
24. PERFORM the procedures 17 through 23 for all 8 holes of Ø ½ inch
or Ø 13 mm.
7.2.2 INSTALLATION OF THE BOAT POWER ELECTRIC WHIP (46):
1. PROCEED the same instructions contained in item 7.1.2;
2. FOLLOW to the item 7.2.3.