Megaleds Orphos, Installation Handbook, Page: 34 / 100

30
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM
REVISION - 02 (MAY, 2020
th
)
MINIMUM TOOLS REQUIRED (not included in the kit):
- electrical or pneumatic drill driver - capacity above Ø
⅝
inch (Ø 16 mm);
- drill Ø ¼ inch and
½
inch (Ø 6 mm and Ø 13 mm ),
- hole saw set Ø 1 inch (Ø 25 mm) (with supports);
- screwdriver minimum dimensions
5/16
in x 7 inches (8 x 180 mm);
- punch tool;
- hammer;
- soldering iron above 70 W (110 or 220 V);
- thermal blower of 1600 W (minimum);
- heat shrink tubing cables (thermal-retractable) Ø ¼ inch x 2.0 ft;
- ty-raps nylon
3/16
inch (5 mm) x 1 ft (300 mm) (minimum dimensions);
- soldering wire (Ø
1/16
inch (1,5 mm);
- sandpaper 80 or 100;
- white or black silicone tube, according to the installer's preference;
- liquid electrical tape (tube with 1 Oz. - 28 g) - black color;
- cartridge sealant gun silicone caulking gun - caulking applicator;
- universal pliers;
- 5-inch diagonal cutting pliers;
- wire stripper pliers;
- scissor;
- round file 6-inch bat with cable;
- Phillips screwdriver;
- measuring tape in inch and mm;
- 12 inches (300 mm) caliper;
- clean cloth for cleaning;
- pencil or fine point pen.
5. CHECK if all components are present in the ORPHOS installation kit.
If any item(s) is (are) missing, PROVIDE this (these) component(s) with the
MEGALEDS distributor NOT proceed in any task without the set of components
being complete .