Megaleds Orphos, Installation Handbook, Page: 22 / 100

18
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM
REVISION - 02 (MAY, 2020
th
)
The figure 12 shows the assembly of the Structural Set (01) in the Bracket
Bolted Set (35) and its locking system, realized by the Lever (39) on the
A
-edge of
the Bracket Base (36). This Lever (39) is hinged and integral with the Back Closing
(06), in a simple and quick fit.
At the end of the fitting and locking of both sets [ the Structural Set (01) +
the Bracket Bolted Set (35)], the Female Connector (40) is coupled to the Male
Connector (30) (figure 14).
The Female Connector (40) is mounted by Screws (42) on the Connectors
Support (41), and this fixed on the Bracket Base (36) by the Screws (43) (figure 13).
Depending on the dimensions and characteristics of the boat, there may be
a need to install the Extensive Base Set (44) between the targa and the Bracket
Bolted Set (35), whose function is to raise the height of the ORPHOS . The figure 15
shows this assembly.
The Chapter 9: ELECTRICAL INSTALLATION addresses the recommenda-
tions of the electrical system. The electrical installation may vary according to the
characteristics of each boat. It is up to each yard or independent assembler to per-
form such a task always supervised by a legally qualified professional, such as an
electrical or naval engineer.