Megaleds Orphos, Installation Handbook, Page: 56 / 100

52
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM
REVISION - 02 (MAY, 2020
th
)
8. INSTALATION OF THE COAXIAL CABLE TO THE
DIGITAL TV ANTENNA:
After completed the previous step– PREPARING THE INSTALLATION:
• FOLLOW the instructions according to below;and
• FOLLOW all the Safety Recommendations described in the Chapter 3 this
Installation Handbook.
8.1 PROCEDURE TO ORPHOS WITHOUT THE EXTENSIVE BASE SET (44):
8.1.1 INSTALLATION OF C-TOOGLE NYLON ANCHOR (38):
1. FOLLOW the instructions contained in item 7.1.1 of Chapter 7 -
INSTALLATION PROCEDURE OF ORPHOS Fi8 this Installation Handbook.
8.1.2 INSTALLATION OF THE POWER ELECTRIC WHIP (46) AND
THE COAXIAL CABLE (50) OF THE DIGITAL TV ANTENNA (16):
1. FOLLOW the instructions contained in item 7.1.2 of Chapter 7 -
INSTALLATION PROCEDURE OF ORPHOS Fi8 this Installation Handbook.
2. PASS the Power Electric Whip by hole of Ø 1 inch (Ø 25 mm) from the
internal to the external side of the targa of the boat;
3. PASS the Coaxial Cable (50) by hole Ø 16 mm (hole B ) of Bracket Bolted
Set (35) (see detail in the figure 17 for identification of hole B and see figure 33 for
final disposition of the Coaxial Cable (50));