Megaleds Orphos, Installation Handbook, Page: 47 / 100

43
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM REVISION - 02 (MAY, 2020
th
)
figure 26: Sealant point application
APPLY WHITE or BLACK Silicone Sealant
in the hole of the Amended Power Electric Whip (48)
15. CHECK the positioning of Bracket Bolted Set (35) on the targa or the
top of the boat, that is, whether it is in line with the longitudinal line of the boat.
If the alignment is NOT in accordance with plan,
DISMOUNT and CORRECT the
assembly, before to apply the Silicone Sealant.
17. APPLY white or black Silicone Sealant around the hole Ø 16 mm the
Bracket Bolted Set (35), that is, in the passage of the Female Connector Power
Electric Whip (47) (inside the Extensive Base (44), for seal this passage as the
water inlet (figure 26);
18. FIT the ORPHOS into the Bracket Bolted Set (35) definitely (figure 27);
35
48