Megaleds Orphos, Installation Handbook, Page: 13 / 100

9
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM REVISION - 02 (MAY, 2020
th
)
Inside the Structural Set (01), fit the Metallic Base (09) to the Laterals (02)
and (03) arranged according to figure 05, whose function is to serve as the rigid
surface of the Central PCI Board (10), Mastlight Capsule Set (11) and Horn Set
(12), when installed. This Metallic Base (09) is constructed of anodized aluminum
sheet, which ensures corrosion resistance of this component.
Still internally, there is the Radar Reflector (13) and the Fixing Support (14)
of the Anchor Light Set (15).These two components are integral with each oth -
er, rigidly forming a single body when joined, all of which are made of anodized
aluminum plate.
On the internal side of the Left Lateral (03), as shown in figure 06, there is
the Digital TV Antenna (16) . This Digital TV Antenna (16) is connected via two
cables to the Connector (17), also attached internally to the Left Lateral (03). The
Digital TV Antenna (16) can be installed, but it is an optional item.
Mounted on the internal side, there is the Starboard Light Set (GREEN) (18)
and the Port Light Set (RED) (19), both are fixed by the Screw (20) as shown in
figure 07. Both are connected by means of connectors proper to the Central PCI Board
(10). In the case of replacement one of these sets, simply replace them with another
component, of the same code.
Attached to the front parts of the Laterals (02) and (03), there is a Front-Facing
Light Set (WHITE - TRANSPARENT) (21), whose parts (front and rear) are mounted
by the two Screws (23) (figure 08).
In the upper part of the Fixing Support (14) the Anchor Light Set (15)
(figure 05) is fixed by the Screws (24).This set is also connected to the PCI Central
Board (10) by a connector. In case of replacement of this set, simply replace with
another component of the same code.