Megaleds Orphos, Installation Handbook, Page: 39 / 100

35
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM REVISION - 02 (MAY, 2020
th
)
22. PULL and CUT the plastic strips according to figure 20C;
23. PERFORM the procedures 17 through 22 for all 8 holes of Ø ½ inch
or Ø 13 mm.
figure 20B Sealing and positioning of the
Guide Bushing (45)
17. BEND the metallic part
over the strips (figure 20A);
18. INSERT the set in one
of the holes Ø
½ inch (Ø 13mm),
according to figure 20A;
19. APPLY in the hole Ø ½
inch (or Ø 13 mm) white or black
Silicone Sealant to seal the Guide
Bushing (45) on the targa or the
top of the roof of the boat (see
figure 22);
20. POSITION and FIT the
Guide Bushing (45) in the hole;
21. PUSH the Guide Bush-
ing (45) toward external surface of
targa or the top of the roof (outward)
(figure 20C);
figure 20C: Pull and cut the plastic strips
and lock the Guide Bushing (45)
45