EN
69
The auger does not
stop when the auger
lever is released.
Auger lever wire incorrectly adjusted.
Adjust the auger lever wire.
The snowblower does
not throw snow.
Ejector chute blocked.
Switch off the engine immediately,
remove the ignition key, and wait until
all moving parts have stopped. Clear
the ejector chute with the clearing tool
or a stick.
One or more shear pins have sheared off. Replace the shear pins.
Foreign object blocking the auger.
Switch off the engine immediately and
remove the ignition key. Remove the
foreign object from the auger.
Auger lever wire adjusted incorrectly.
Adjust the auger lever wire.
Rotor drive belt loose or damaged.
Replace the belt.
