MediSono P11 EXP User Manual Download Page 32

Page: 32 / 151

P11 EXP

Portable Digital Color Doppler Ultrasound System

8 -
10

D GAIN

rotate this key to adjust the Doppler gain.

GAIN

rotate this key to adjust the 2D gain.

Patient

press this key to access the Patient Information interface.

Flow Invert

press this key to activate/deactivate the Flow Invert function in

color Doppler mode.

Arrow

insert an arrow symbol on the ultrasound image

m-Tuning

press this key during scanning to let the system automatically

adjust various parameters to obtain high quality image.

SAVE

press this key during real time scan to save current application

mode as new user-defined mode.

press this key while the ultrasound image is frozen to save im-
age or cine replay.

trigger the network printers.

DEL

remove the most recently inserted annotations or Bodymarks.

or redefine the route of trace.

AUDIO

adjust the Doppler sound volume.

press this knob to activate the context menu, turn it to change

the value of the selected item.

continued on next page . . .

CLR

clear the all measurements and calculations.

REPORT

write report for current diagnosis.

start volume mode (3D or real time 4D mode).

Dual

press this key to start/end dual display.

L/R

flips the ultrasound image left/right.

U/D

flips the ultrasound image upward/downward.

Annotation

insert texts or predefined annotation items.

Bodymark

insert Bodymarks on the screen.

Summary of Contents for P11 EXP
























































































































































Search results

Summary of Contents for P11 EXP

Reviews:

Related manuals for P11 EXP

Brands by name

Popular brands

MediSono P11 EXP, User Manual

Search results

Summary of Contents for P11 EXP

Reviews:

Related manuals for P11 EXP

Brands by name

Popular brands