MediSono P11 EXP User Manual Download Page 3

Page: 3 / 151

P11 EXP

Portable Digital Color Doppler Ultrasound System

0-1

The advanced user manual provides information about the measurements and

calculations available in each mode.

Compact Disc (CD) provides the acoustic output data related to the system.

Signal words in this manual are defined as follows. Please understand their meanings clearly before reading

this manual.

Signal Word

Meaning

Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may

result in malfunction or damage of the system.

NOTE

Indicates precautions or recommendations that should be used in

operating the system.

Indicates a potentially biological hazardous situation which, if not avoided,

may result in disease transmission.

Boldface

d Word

Indicates keys and controls located on the control panel, or on-screen

objects such as menu items or keys.

Contact Information

Manufacturer: MEDISONO

Address: 3511 Silverside RD. Wilmington, DE 19810,United States

[email protected]

Summary of Contents for P11 EXP
























































































































































Search results

Summary of Contents for P11 EXP

Reviews:

Related manuals for P11 EXP

Brands by name

Popular brands

MediSono P11 EXP, User Manual

Search results

Summary of Contents for P11 EXP

Reviews:

Related manuals for P11 EXP

Brands by name

Popular brands