MediSono P11 EXP, User Manual

Page: 37 / 151

P11 EXP
Portable Digital Color Doppler Ultrasound System
3-3
OK
.
OK
.
Set
video printer is ready to work immediately without any configurations after a successful
connection.
3.2.3 Connecting the Network Printer and USB Printer
3.2.3.1 To install Network Printer
Printer Setup
1. Connect the printer to the ultrasound system, and turn on the printer. The printer
settings are displayed as below.
2. Press
OK
on the control panel menu of the printer.
3. Press the left or right key to select
Network Config
, and then press
OK
to confirm.
4. Press the left or right key to select
TCP IP Config
, and then press
OK
to confirm.
5. Press the left or right key to select
Manual
, and then press
OK
to confirm.
6. An IP address is displayed, change it to 192.168.254.183 by pressing the left or right
key, and then press
7. If the IP address is correct, use the left or right key to select Yes, and then press
If the IP address is incorrect, use the left or right key to select
Repeat Step 6 to enter a correct address.
and then press
8. After setting IP address, set the subnet mask to 255.255.255.0 and default gateway
to 192.168.254.183 in the same way as described above.
Ultrasound System Setup
1. Copy the driver file deskjet.ppd provided by the manufacturer into the directory of the
USB drive.
2. Connect the drive to the ultrasound system, and then start up the ultrasound system.
3. Choose
System Settings
->
Set Printer
->
Insert Driver
by using the trackball on the
ultrasound system.
4. Select the key on the control panel, the screen displays Insert USB including
deskjet.ppd and select the Set key again to complete the installation of the printer
drive.
No
,
OK
.