MediSono P11 EXP, User Manual

Page: 40 / 151

P11 EXP
Portable Digital Color Doppler Ultrasound System
3-6
3.3.2 Using Battery
The battery serves as a power source when no AC power supply is available. A fully
charged battery can provide power for the system for up to 1 hours. To start operating the
system using only the battery, you need to long-press the power button (press and hold
down the power button for at least 2 seconds).
Battery charging time (from depletion to full):
When the system is off:
approximately 2.5 hours.
When the system is on:
approximately 12 hours.
Warning!
• This battery is designed to be an integral part of the ultrasound
system. Attempting do-it-yourself removal of the battery not only
voids the warranty but also violates the regulations, and is
discouraged by IEC 60601-1.
• Do not short the metal pins on the connectors using metal objects.
✖
Information for disposing the battery:
To dispose and recycle the ultrasound system and the battery properly,
contact
the manufacturer
representative for instructions.
Turn on the system without connecting the AC adapter to use the battery as the source.
Disconnect the output plug of the AC adapter from the system while it is on, and the system
uses battery as the source automatically.
You may charge the battery while the system is off by connecting the AC adapter to the
system.
You may also charge the battery without turning off the system.
Instructions for charging battery with system on:
1. Connect the equipotential point at the rear panel to safety ground (earth).
2. Attach the connector of the power cable to the AC adapter firmly.
3. Connect the power plug of the AC adapter to the outlet marked with
“hospital grade”.
4. Connect the DC output plug into the power supply socket on the ultrasound system.
The system automatically charges the battery and takes the AC supply as source.
Power supply socket
Ultrasound
system
Power supply socket
Ultrasound
system