MediSono P11 EXP, User Manual

Page: 98 / 151

P11 EXP
Portable Digital Color Doppler Ultrasound System
8-4
F1
F1
F2
F3
8.3.7 Color Map
C MAP
Similar to the Color Map in the CFM mode, this function select the method for the color-
coding of the display of color flow.
• press
to select C MAP .
• turn the function knob to adjust the
CHROMA setting.
✖
Remark:
• The Color Map method is displayed on the screen at the Color Image
Info area (the
C
in
C/P
).
8.3.8 TDI Power
POWER %
Similar to the acoustic output power in the B mode, the value of the output power in the TDI
mode should be kept as low as reasonably achievable.
• press
to select POWER % .
• turn the function knob to change the output power.
✖
Remark:
• The acoustic output power in the TDI mode is displayed on the screen
at the Color Image Info area (
PWR
).
8.3.9 Baseline
BASELINE
Moving the baseline increases the velocity range in one direction, the zero position also
moves as a result. The maximum velocities in both directions are displayed at the ends of
the Spectral Wedge (15, Figure 2.4 ).
• Flip the
BASELINE
button to move the baseline up or down to move the baseline;
or
• Select
BASELINE from the context menu, turn the
MENU
knob to move the base-
line.
8.3.10 Sector Width and Position
SEC.WIDTH
• press
to select SEC.WIDTH .
• turn the function knob to change the sector width.
SEC.POS
• press
to select SEC.POS .
• turn the function knob to change the sector position.
Sector width and position are the same as those in the B mode, refer to Section 5.3.13 for
explanations.