MediSono P11 EXP, User Manual

Page: 119 / 151

11-1
PW
Chapter 11
Triplex Mode
The triple mode is overlapped by three different imaging modes, and can be applied to
view the image. The triple mode includes B+CFM/TDI+M, B+CFM/DPI/TDI +PW and and
B+CFM/DPI+CW.
11.1 B+CFM/TDI+M
Note:
Only the phased probes including 2P1 and 5P1 are available for B+CFM/TDI +M.
Perform the following steps to acquire the image.
1. Optimize a CFM/TDI mode image.
2. Press the
M
key to enter the inactive B+CFM/TDI +M mode.
• The M-mode cursor is used to position the M-line.
• X-axis is the time scale.
• Y-axis is the depth scale.
3. Adjust the M-mode cursor by using the trackball.
4. Press the
UPDATE
key on the control panel to activate the M mode.
5. Optimize M-mode image. For details, refer to Section 9.3 .
6. Press the
M
key again to exit.
11.2 B+CFM/DPI/TDI+PW
Perform the following steps to acquire the image.
1. Optimize a CFM/DPI/TDI-mode image.
2. Press the key to enter the inactive B+CFM/DPI/TDI+PW mode.
• The Spectral Doppler line and the sample volume gate are used to locate the
qualitative analysis on the image.
• The flow cursor needs to be adjusted parallel to the flow when measuring the
velocity.
• X-axis is the time scale.
• Y-axis is Doppler frequency scale, including a positive and negative indicator.