MediSono P11 EXP, User Manual

Page: 41 / 151

P11 EXP
Portable Digital Color Doppler Ultrasound System
3-7
Caution!
• Make sure to follow the above steps. Connecting the DC output plug
of the AC adapter, which has no AC input, into the system can trigger
protection mechanism which automatically shuts down the system.
• If auto-shutdown due to misoperation occurs, connect to the AC
source and restart the system.
• Charge the battery only when the ambient temperature is between
0°C and 45°C.
• When you hear the beep sound and the LED BAT is blinking, it means
that the battery power is almost depleted. You should save your data
and turn off the system or connect the system to an AC power source
immediately.
✖
Note:
Once the system is turned on, the control panel will be illuminated. It
takes about 1 minute for the system to enter the preparation mode (EXAM
screen).
Caution!
DO NOT plug in any external USB drive before the system startup com-
pletes, otherwise the µSCAN function might be interrupted.
3.3.3 LED Indicators
The three Light-Emitting Diodes (LEDs), shown in Figure 3.2 , indicate the power supply
status and the battery status. Their indications are listed in Table 3.1 and Table 3.2 .
Battery
indicator
Charge
indicator
AC adaptor
indicator
Figure 3.2:
LED Indicators
LED
indicators
BAT CHG POR