MDT Technologies SCN-IP000.03 Technical Manual Download Page 52 | Manualshive

Page: 52 / 57

background image

Technical Manual – IP Router SCN-IP100.03

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Tel.: +49-2263-

880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de

52

52

Now the sending E-mail address and the destination addresses (up to 3) can be set.
The following settings have to be made for the sending email address:



SMTP server address

Here the outgoing mail server has to be specified.



SMTP server port

Here the port is specified for the outgoing mail.



E-Mail Address

Specification of the sending email address.



Username

The name needs to be entered with which you log on to your e-mail address. This can vary
depending on the provider and can be e.g. a complete e-mail address, a user name or an ID.



Password

Enter the password you use to log in to your e-mail address.

Note: The following example is made with the German provider “WEB.DE”. For details regarding
the specifications of other providers (outside Germany) please check with your local provider.

If searching for server data e.g. at web.de, the following data are given:

Figure 40: Example 1 – Server data (German)

Thus, in the field „SMTP server address“ the value „smtp.web.de“ can be entered and in the field
„SMTP server port“ the value „587“
At the provider web.de it is further required that the sending of e-mails via external programs needs
to be activated in the settings:

Figure 41: Example 2 – Server data (German)

«
...
50
51
52
53
54
...
»

Summary of Contents for SCN-IP000.03


























































Reviews:

No comments

Related manuals for SCN-IP000.03

Univerge SV8100

Brand: NEC Pages: 44

Brand: NEC Pages: 8

Brand: Raritan Pages: 4

Brand: SAF Pages: 30

Brand: dixell Pages: 4

Brand: Supermicro Pages: 27

Brand: YATO Pages: 96

Brand: ActionTec Pages: 115

SmartSwitch 8-slot

Brand: Cabletron Systems Pages: 150

Brand: Digisol Pages: 22

Brand: Microtek Pages: 25

Brand: Comelit Pages: 140

TigerSwitch 100 SMC6924VF

Brand: SMC Networks Pages: 174

Brand: Cleerline Pages: 2

Brand: Teldat Pages: 47

Brand: ICP DAS USA Pages: 8

ISDN Router ISDN

Brand: Ringdale Pages: 165

Brand: Syris Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands