Technical Manual – IP Router SCN-IP100.03
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
54
54
6.4 E-Mail – Error codes & remedy
Status in the web interface always shows the status of the last sent email. If an error occurs, the error
codes have the following meanings:
Error 0: No error (250 Requested mail action okay, completed: id=0LgK3g-1aIfqB1ZsS-
00nhnX)
o
Last E-Mail was sent without problems.
Error 4: unable to connect to server
o
Wrong Port specified
Check Port
Error 6: invalid sending Email address
o
Sending-E-Mail address is invalid
o
Sending-E-Mail address not accepted by server
Check the settings for the E-Mail address
Error 8: invalid receiving Email address
o
Destination E-Mail address is invalid
Check destination E-Mail address
Error 9: Socket unexpectedly closed
Restart the device and if necessary reprogram
Error 12: Unknown/unsupported server authentication request (535 Authentication
credentials invalid)
o
Invalid username or password
Check username and/or password
6.5 Receive E-Mail as push message
E-mails can be received as a push message to the phone. Therefore, certain services need to be used.
Thus, e.g. be used for Apple devices, the service Prowl:
By using push messages, emails are immediately displayed as "Notification" on the device.
6.6 Receive E-Mail as SMS
To convert emails into SMS and send this, a number of providers offer this service in certain packages,
for example, Telekom. If your email provider does not support any SMS-service for e-mails, so third
parties like SMS77 -
